Bei grossen Gesetzen wie OR und ZGB kann dies bis zu 30 Sekunden dauern

Noise Abatement Ordinance
(NAO)

English is not an official language of the Swiss Confederation. This translation is provided for information purposes only and has no legal force.

of 15 December 1986 (Status as of 1 July 2021)

The Swiss Federal Council,

on the basis of Articles 5, 12 paragraph 2, 13 paragraph 1, 16 paragraph 2, 19, 21 paragraph 2, 23, 39 paragraph 1, 40 and 45 of the Federal Act of 7 October 19831 on the Protection of the Environment (the Act),

ordains:

1 SR 814.01

Chapter 1 General Provisions

Art. 1 Aim and scope  

1 This Or­din­ance is in­ten­ded to pro­tect against harm­ful and dis­turb­ing noise.

2 It reg­u­lates:

a.
the lim­it­a­tion of ex­ter­i­or noise emis­sions caused by the op­er­a­tion of new and ex­ist­ing in­stall­a­tions in ac­cord­ance with Art­icle 7 of the Act;
b.
the des­ig­na­tion and de­vel­op­ment of build­ing zones in areas ex­posed to noise;
c.
the is­su­ing of plan­ning per­mis­sion for build­ings with rooms sens­it­ive to noise and ly­ing in areas ex­posed to noise;
d.
the sound­proof­ing against ex­ter­i­or and in­teri­or noise of new build­ings with rooms sens­it­ive to noise;
e.
the sound­proof­ing against ex­ter­i­or noise of ex­ist­ing build­ings with rooms sens­it­ive to noise;
f.
the de­term­in­a­tion of the ex­pos­ure to ex­ter­i­or noise and its rat­ing based on ex­pos­ure lim­it val­ues.

3 It does not reg­u­late:

a.
pro­tec­tion against noise ori­gin­at­ing from an in­dus­tri­al site as long as this only af­fects in­dus­tri­al build­ings and dwell­ings with­in the site;
b.
pro­tec­tion against in­fra- and ul­tra­sound.

4…2

2 Re­pealed by No I of the O of 12 April 2000, with ef­fect from 1 May 2000 (AS 2000 1388).

Art. 2 Definitions  

1 Sta­tion­ary in­stall­a­tions are build­ings, trans­port fa­cil­it­ies, build­ing fa­cil­it­ies and oth­er im­mob­ile equip­ment that gen­er­ate ex­ter­i­or noise dur­ing op­er­a­tion. These in­clude in par­tic­u­lar roads, rail­way in­stall­a­tions, aero­dromes, in­dus­tri­al, com­mer­cial and ag­ri­cul­tur­al in­stall­a­tions, fir­ing ranges and per­man­ent mil­it­ary fir­ing ranges and train­ing grounds.

2 New sta­tion­ary in­stall­a­tions also in­clude sta­tion­ary in­stall­a­tions and build­ings whose use has been com­pletely altered.

3 Emis­sion lim­it­a­tion meas­ures are tech­nic­al, struc­tur­al or func­tion­al modi­fic­a­tions to in­stall­a­tions, or meas­ures to re­dir­ect, re­strict or calm the flow of traffic, or struc­tur­al meas­ures along the emis­sion path. The pur­pose of the meas­ures is to pre­vent or re­duce the gen­er­a­tion or propaga­tion of ex­ter­i­or noise.

4 Im­prove­ments are emis­sion lim­it­a­tion meas­ures for ex­ist­ing sta­tion­ary in­stall­a­tions.

5 Ex­pos­ure lim­it val­ues in­clude im­pact thresholds, plan­ning val­ues and alarm val­ues. These are set ac­cord­ing to the noise char­ac­ter­ist­ics, the time of day and the sens­it­iv­ity to noise of the build­ings and areas to be pro­tec­ted.

6 Rooms sens­it­ive to noise are:

a.
rooms in dwell­ings with the ex­cep­tion of kit­chens without din­ing fa­cil­it­ies, wash­rooms and stor­e­rooms;
b.
rooms in in­dus­tri­al build­ings that are reg­u­larly oc­cu­pied by per­sons for sus­tained peri­ods of time, with the ex­cep­tion of those for farm an­im­als and those with high levels of in­dus­tri­al noise.

Chapter 2 Vehicles, Mobile Appliances and Machines

Section 1 Emission Limitation Measures from Vehicles

Art. 3  

1 Noise emit­ted from mo­tor­ised vehicles, air­craft, wa­ter craft and rail­ways must be re­duced as far as pos­sible by tech­nic­al and op­er­a­tion­al means, and to the ex­tent that this is eco­nom­ic­ally ac­cept­able.

2 Emis­sion lim­it­a­tion meas­ures are gov­erned by the le­gis­la­tion on road traffic, civil avi­ation, in­land nav­ig­a­tion or the rail­ways, provided the vehicle con­cerned is covered by one of these cat­egor­ies of le­gis­la­tion.

3 Emis­sion lim­it­a­tion meas­ures for oth­er vehicles is gov­erned by the pro­vi­sions on mo­bile ap­pli­ances and ma­chines.

Section 2 Emission Limitation Measures for Mobile Appliances and Machines

Art. 4 Principles  

1 The emis­sions of ex­ter­i­or noise from mo­bile ap­pli­ances and ma­chines must be re­duced to the ex­tent that:

a.
this is tech­nic­ally and op­er­a­tion­ally feas­ible and eco­nom­ic­ally ac­cept­able; and that
b.
the well-be­ing of the af­fected pop­u­la­tion is not ser­i­ously im­paired.

2 The en­force­ment au­thor­it­ies shall or­der op­er­a­tion­al and struc­tur­al meas­ures, or those for prop­er main­ten­ance.

3 Where it is not pos­sible to avoid ex­pos­ure to highly dis­turb­ing noise due to the op­er­a­tion of mil­it­ary equip­ment, ma­chines and weapons, the en­force­ment au­thor­it­ies shall re­lax the re­quire­ments.

4 The emis­sions of ap­pli­ances and ma­chines that are used to op­er­ate a sta­tion­ary in­stall­a­tion are lim­ited ac­cord­ing to the pro­vi­sions on sta­tion­ary in­stall­a­tions.

Art. 5 Conformity assessment and marking of equipment and machines 3  

1 Equip­ment and ma­chines may be placed on the mar­ket only fol­low­ing a con­form­ity as­sess­ment and the ap­pro­pri­ate mark­ing.

2 The Fed­er­al De­part­ment of the En­vir­on­ment, Trans­port, En­ergy and Com­mu­nic­a­tions (DE­TEC) shall spe­cify:4

a.
the types of equip­ment and ma­chines sub­ject to the con­form­ity as­sess­ment and mark­ing;
b.
the re­quire­ments for pre­vent­ive emis­sion lim­it­a­tion meas­ures and mark­ing, tak­ing in­to ac­count in­ter­na­tion­ally re­cog­nised stand­ards;
c.
the doc­u­ments to be sub­mit­ted for the pur­pose of the con­form­ity as­sess­ment;
d.
the test, meas­ure­ment and cal­cu­la­tion pro­ced­ures;
e.
the sub­sequent con­trols;
f.
the re­cog­ni­tion of for­eign test res­ults and la­belling.

3 Amended by No I of the O of 23 Aug. 2006, in force since 1 Nov. 2006 (AS 2006 3693).

4 Amended by No I of the O of 30 June 2010, in force since 1 Aug. 2010 (AS 2010 3223).

Art. 6 Regulations on noise from building sites  

The Fed­er­al Of­fice for the En­vir­on­ment5 shall is­sue reg­u­la­tions cov­er­ing struc­tur­al and op­er­a­tion­al meas­ures to con­trol noise from build­ing sites.

5 The name of the ad­min­is­trat­ive unit has been changed in ap­plic­a­tion of Art. 16 para. 3 of the Pub­lic­a­tion Or­din­ance of 17 Nov. 2004 (AS 20044937). This change has been made throughout the text.

Chapter 3 New and Modified Stationary Installations

Art. 7 Emission limitation measures for new stationary installations  

1 Noise emis­sions from new sta­tion­ary in­stall­a­tions shall be lim­ited as dir­ec­ted by the en­force­ment au­thor­it­ies in­so­far as:

a.
this is tech­nic­ally and op­er­a­tion­ally feas­ible and eco­nom­ic­ally ac­cept­able; and
b.
the noise ex­pos­ure level res­ult­ing from the in­stall­a­tion alone does not ex­ceed the plan­ning val­ues.

2 The en­force­ment au­thor­it­ies shall re­lax the re­quire­ments in cases where com­pli­ance with the plan­ning val­ues would place a dis­pro­por­tion­ate bur­den on the in­stall­a­tion and there is an over­rid­ing pub­lic in­terest, par­tic­u­larly re­gard­ing ques­tions of spa­tial plan­ning. The im­pact thresholds must not, however, be ex­ceeded.6

6Amended by No I of the O of 16 June 1997, in force since 1 Aug. 1997 (AS 1997 1588).

Art. 8 Emission limitation measures for modified stationary installations  

1 Where a sta­tion­ary in­stall­a­tion that already ex­ists when this Or­din­ance comes in­to force is mod­i­fied, the noise emis­sions from the new or mod­i­fied parts of the in­stall­a­tion must be lim­ited as dir­ec­ted by the en­force­ment au­thor­it­ies as far as this is tech­nic­ally and op­er­a­tion­ally feas­ible and eco­nom­ic­ally ac­cept­able.7

2 If the in­stall­a­tion is sig­ni­fic­antly mod­i­fied, the noise emis­sions from the in­stall­a­tion as a whole must be lim­ited at least to the ex­tent that the im­pact thresholds are not ex­ceeded.

3 Con­ver­sions, ex­ten­sions and op­er­a­tion­al changes car­ried out by the per­son re­spons­ible for the in­stall­a­tion con­sti­tute sig­ni­fic­ant modi­fic­a­tions to sta­tion­ary in­stall­a­tions if it is an­ti­cip­ated that the noise ex­pos­ure level will rise per­cept­ibly as a res­ult either of the in­stall­a­tion it­self or of the in­creased de­mand on ex­ist­ing trans­port fa­cil­it­ies. The re­build­ing of an in­stall­a­tion con­sti­tutes a sig­ni­fic­ant modi­fic­a­tion ir­re­spect­ive of the cir­cum­stances.

4 If a new sta­tion­ary in­stall­a­tion is mod­i­fied, Art­icle 7 ap­plies.8

7 Amended by No I of the O of 30 June 2010, in force since 1 Aug. 2010 (AS 2010 3223).

8Amended by No I of the O of 16 June 1997, in force since 1 Aug. 1997 (AS 1997 1588).

Art. 9 Increased demand on transport facilities  

The op­er­a­tion of new or sig­ni­fic­antly mod­i­fied sta­tion­ary in­stall­a­tions must not lead to a situ­ation in which:

a.
ow­ing to the in­creased de­mand made on a trans­port fa­cil­ity, the im­pact thresholds are ex­ceeded; or
b.
ow­ing to the in­creased de­mand made on a trans­port fa­cil­ity in need of re­medi­ation, the noise ex­pos­ure level rises per­cept­ibly.
Art. 10 Soundproofing measures in existing buildings  

1 If the re­quire­ments spe­cified in Art­icles 7 para­graph 2 and 8 para­graph 2 or in Art­icle 9 are not ful­filled by new or sig­ni­fic­antly mod­i­fied pub­lic or li­censed sta­tion­ary in­stall­a­tions, the en­force­ment au­thor­it­ies shall re­quire the own­ers of ex­ist­ing build­ings ex­posed to noise to sound­proof the win­dows of rooms sens­it­ive to noise in ac­cord­ance with An­nex 1.

2 With the ap­prov­al of the en­force­ment au­thor­it­ies, build­ing own­ers may carry out oth­er struc­tur­al sound­proof­ing meas­ures provided these re­duce the noise with­in the rooms to the same ex­tent.

3 Sound­proof­ing meas­ures need not be taken if:

a.
no per­cept­ible re­duc­tion of the noise level in the build­ing is to be ex­pec­ted;
b.
they con­flict with the over­rid­ing in­terest of pre­serving loc­al char­ac­ter or monu­ments;
c.
the build­ing is due to be de­mol­ished with­in three years of put­ting the new or mod­i­fied in­stall­a­tion in­to ser­vice, or the rooms con­cerned will be con­ver­ted to pur­poses not sens­it­ive to noise with­in this peri­od.
Art. 11 Costs  

1 The per­son re­spons­ible for the new or sig­ni­fic­antly mod­i­fied in­stall­a­tion bears the costs of lim­it­ing the emis­sion it causes.

2 If the build­ing own­er is re­quired to take sound­proof­ing meas­ures ac­cord­ing to Art­icle 10 para­graph 1, the per­son re­spons­ible for the in­stall­a­tion also bears the cus­tom­ary loc­al costs proven to be due for:

a.
en­gin­eer­ing and su­per­vi­sion of works;
b.
sound­proof­ing of the win­dows in ac­cord­ance with An­nex 1 and the res­ult­ing ne­ces­sary ad­apt­a­tions;
c.
the fin­an­cing if the per­son re­spons­ible has failed to con­trib­ute des­pite be­ing re­ques­ted to do so by the build­ing own­er;
d.
any fees due.

3 If the build­ing own­er is re­quired to take sound­proof­ing meas­ures ac­cord­ing to Art­icle 10 para­graph 2, the per­son re­spons­ible for the in­stall­a­tion bears the cus­tom­ary loc­al costs proven to be due in­so­far as these do not ex­ceed those un­der para­graph 2. The build­ing own­er bears the re­main­ing costs.

4 Where the need for emis­sion lim­it­a­tion meas­ures or sound­proof­ing meas­ures arises as a res­ult of noise from sev­er­al in­stall­a­tions, the costs are di­vided among the in­stall­a­tions in pro­por­tion to their con­tri­bu­tion to the noise ex­pos­ure level.

5 The build­ing own­er bears the costs for main­ten­ance and re­new­al of the sound­proof­ing meas­ures.

Art. 12 Inspection  

The en­force­ment au­thor­it­ies shall in­spect the new or mod­i­fied in­stall­a­tion with­in one year of its be­ing put in­to ser­vice to check wheth­er the emis­sion lim­it­a­tion and sound­proof­ing meas­ures ordered have been taken. In the event of any doubt, they carry out tests to as­sess the ef­fect­ive­ness of the meas­ures.

Chapter 4 Existing Stationary Installations

Section 1 Improvements and Soundproofing Measures

Art. 13 Improvements  

1 In the case of sta­tion­ary in­stall­a­tions that con­trib­ute sig­ni­fic­antly to the im­pact thresholds be­ing ex­ceeded, the en­force­ment au­thor­it­ies shall or­der the ne­ces­sary im­prove­ment meas­ures, after hear­ing the per­sons re­spons­ible for the in­stall­a­tions.

2 The in­stall­a­tions shall be im­proved to the ex­tent that:

a.
is tech­nic­ally and op­er­a­tion­ally feas­ible and eco­nom­ic­ally ac­cept­able; and
b.
the im­pact thresholds are no longer ex­ceeded.

3 Un­less there are over­rid­ing in­terests, the en­force­ment au­thor­it­ies give pri­or­ity to meas­ures which pre­vent or re­duce noise gen­er­a­tion in pref­er­ence to those which simply pre­vent or re­duce noise propaga­tion.

4 Im­prove­ments need not be car­ried out if:

a.
the im­pact thresholds are ex­ceeded only in build­ing zones that have not yet been de­veloped;
b.
due to the can­ton­al build­ing and plan­ning le­gis­la­tion, plan­ning, design or struc­tur­al meas­ures taken at the site ex­posed to the noise will sat­is­fy the im­pact thresholds be­fore the time lim­it spe­cified in Art­icle 17.
Art. 14 Relaxation of the requirements for improvements  

1 The en­force­ment au­thor­it­ies shall re­lax the re­quire­ments in cases where:

a.
im­prove­ments would res­ult in un­reas­on­able op­er­a­tion­al lim­it­a­tions or costs;
b.
over­rid­ing in­terests, namely those of the pre­ser­va­tion of loc­al char­ac­ter, nature and land­scape pro­tec­tion, traffic and op­er­a­tion­al safety, or na­tion­al se­cur­ity, con­flict with the im­prove­ment ob­ject­ive.

2 Un­li­censed private in­stall­a­tions must not, however, ex­ceed the alarm val­ues.

Art. 15 Soundproofing measures for existing buildings  

1 If, as a res­ult of re­lax­ing the re­quire­ments, the alarm val­ues for pub­lic or li­censed sta­tion­ary in­stall­a­tions can­not be com­plied with, the en­force­ment au­thor­it­ies shall re­quire the own­ers of ex­ist­ing build­ings ex­posed to noise to sound­proof the win­dows of rooms sens­it­ive to noise in ac­cord­ance with An­nex 1.

2 With the ap­prov­al of the en­force­ment au­thor­it­ies, build­ing own­ers may take oth­er sound­proof­ing meas­ures in the build­ing provided these re­duce the noise with­in the rooms to the same ex­tent.

3 Sound­proof­ing meas­ures need not be taken if:

a.
no per­cept­ible re­duc­tion of noise in the build­ing is to be ex­pec­ted;
b.
they con­flict with the over­rid­ing in­terest of pre­serving loc­al char­ac­ter or monu­ments;
c.
the build­ing is due to be de­mol­ished with­in three years of the sound­proof­ing meas­ures be­ing ordered, or the rooms will be con­ver­ted to pur­poses not sens­it­ive to noise with­in this peri­od.
Art. 16 Costs  

1 The per­son re­spons­ible for the in­stall­a­tion bears the costs of its im­prove­ment.

2 The per­son re­spons­ible for a pub­lic or li­censed in­stall­a­tion also bears the costs of sound­proof­ing meas­ures for ex­ist­ing build­ings un­der Art­icle 11, un­less an ex­emp­tion has been gran­ted un­der Art­icle 20 para­graph 2 of the Act.

3 Where im­prove­ments or sound­proof­ing meas­ures are re­quired as a res­ult of noise from sev­er­al in­stall­a­tions, the costs are di­vided among the in­stall­a­tions in pro­por­tion to their con­tri­bu­tion to the noise ex­pos­ure level.

4 The build­ing own­er bears the costs of main­ten­ance and re­new­al of the sound­proof­ing meas­ures.

Art. 17 Time limits  

1 The en­force­ment au­thor­it­ies set the time lim­its for im­ple­ment­ing im­prove­ments and sound­proof­ing meas­ures ac­cord­ing to their ur­gency.

2 In as­sess­ing ur­gency, the fol­low­ing factors are de­cis­ive:

a.
the ex­tent to which the im­pact thresholds are ex­ceeded;
b.
the num­ber of per­sons af­fected by the noise;
c.
the cost-be­ne­fit re­la­tion­ship.

3 The im­prove­ments and sound­proof­ing meas­ures must be com­pleted with­in 15 years of this Or­din­ance com­ing in­to force.

4 The time lim­it (para. 3) for im­prove­ments and sound­proof­ing meas­ures on roads are ex­ten­ded:

for na­tion­al roads un­til 31 March 2015;
for trunk roads ac­cord­ing to Art­icle 12 of the Fed­er­al Act of 22 March 19859 on the Ap­plic­a­tion of the Ear­marked Min­er­al Oil Tax (MinOA), and for oth­er roads un­til 31 March 201810.

5 The time lim­its spe­cified in the Fed­er­al Act of 24 March 200011 on Rail­ways Noise Abate­ment ap­ply to the com­ple­tion of im­prove­ments and sound­proof­ing meas­ures on rail­way in­stall­a­tions.12

6 The im­prove­ments and sound­proof­ing meas­ures must be com­pleted:

at mil­it­ary aero­dromes by 31 Ju­ly 2020;
at civil aero­dromes that are used by heavy air­craft by 31 May 2016;
at civil shoot­ing ranges that re­quire com­puls­ory im­prove­ments as a res­ult of the Amend­ment of 23 Au­gust 200613 of An­nex 7: by 1 Novem­ber 2016;
at mil­it­ary fir­ing ranges and train­ing grounds: by 31 Ju­ly 2025.14

9 SR 725.116.2

10 In­ser­ted by No I of the O of 1 Sept. 2004, in force since 1 Oct. 2004 (AS 2004 4167).

11 SR 742.144

12 In­ser­ted by No I of the O of 1 Sept. 2004, in force since 1 Oct. 2004 (AS 2004 4167).

13 AS 2006 3693

14 In­ser­ted by No I of the O of 23 Aug. 2006 (AS 20063693). Amended by No I of the O of 30 June 2010, in force since 1 Aug. 2010 (AS 2010 3223).

Art. 18 Inspection  

With­in one year of com­ple­tion, the en­force­ment au­thor­it­ies shall in­spect the im­prove­ments and sound­proof­ing meas­ures to check com­pli­ance with the meas­ures ordered. In case of doubt, they carry out tests to as­sess the ef­fect­ive­ness of the meas­ures.

Art. 1915  

15 Re­pealed by No I of the O of 1 Sept. 2004, with ef­fect from 1 Oct. 2004 (AS 2004 4167).

Art. 20 Periodical surveys 16  

1 The Fed­er­al Of­fice for the En­vir­on­ment shall en­quire reg­u­larly of the en­force­ment au­thor­it­ies as to the status of the im­prove­ments and the noise pro­tec­tion meas­ures, in par­tic­u­lar con­cern­ing roads, rail­way in­stall­a­tions, aero­dromes, shoot­ing ranges and mil­it­ary shoot­ing ranges and train­ing areas.

2 For roads, the en­force­ment au­thor­it­ies must provide the fol­low­ing doc­u­ments in par­tic­u­lar by 31 March each year:

a sum­mary of:
1.
the roads or sec­tions of road re­quir­ing im­prove­ments,
2.
the time frame with­in which these roads and sec­tions of road will be im­proved,
3.
the total costs of these im­prove­ments and noise pro­tec­tion meas­ures, and
4.
the num­ber of per­sons ex­posed to noise levels above the im­pact thresholds and alarm val­ues;
b.
a re­port on:
1.
the im­prove­ments made to roads and sec­tions of road, and the sound­proof­ing meas­ures im­ple­men­ted in the pre­vi­ous year, and
2.
the ef­fect­ive­ness and the costs of these im­prove­ments and noise pro­tec­tion meas­ures.

3 For na­tion­al roads, it shall ob­tain the in­form­a­tion un­der Para­graph 2 from the Fed­er­al Roads Of­fice. For trunk roads and oth­er roads it shall ob­tain this in­form­a­tion from the can­tons. The in­form­a­tion must be sub­mit­ted in ac­cord­ance with the re­quire­ments of the Fed­er­al Of­fice for the En­vir­on­ment.

4 The Fed­er­al Of­fice for the En­vir­on­ment shall as­sess the in­form­a­tion in par­tic­u­lar in re­la­tion to the pro­gress made with im­prove­ments and the costs and ef­fect­ive­ness of the meas­ures. It shall in­form the en­force­ment au­thor­it­ies of the res­ults and pub­lishes them.

16 Amended by No I 14 of the O of 7 Nov. 2007 on the New Sys­tem of Fisc­al Equal­isa­tion and Di­vi­sion of Tasks between the Con­fed­er­a­tion and the Can­tons, in force since 1 Jan. 2008 (AS 2007 5823).

Section 2 Federal Subsidies for Improvements and Soundproofing Measures on Existing Trunk Roads and Other Roads17

17 Amended by No I 14 of the O of 7 Nov. 2007 on the New System of Fiscal Equalisation and Division of Tasks between the Confederation and the Cantons, in force since 1 Jan. 2008 (AS 2007 5823).

Art. 21 Eligibility for subsidies  

1 The Con­fed­er­a­tion shall grant sub­sidies for im­prove­ments and sound­proof­ing meas­ures on ex­ist­ing in­fra­struc­ture for:18

trunk roads ac­cord­ing to Art­icle 12 MinOA19;
oth­er roads.

2 The sub­sidies gran­ted un­der para­graph 1 let­ter a form part of the glob­al pay­ments ac­cord­ing to Art­icle 13 MinOA. The pay­ments un­der para­graph 1 let­ter b are gran­ted glob­ally for the road sec­tions defined with the can­tons in pro­gramme agree­ments.

3 ...20

18 Amended by No I of the O of 21 Feb. 2018, in force since 1 April 2018 (AS 2018 965).

19 SR 725.116.2

20 In­ser­ted by No I of the O of 21 Feb. 2018 (AS 2018 965). Re­pealed by No I of the O of 12 May 2021, with ef­fect from 1 Ju­ly 2021 (AS 2021 293).

Art. 22 Application  

1 The can­ton sub­mits the ap­plic­a­tion for sub­sidies for im­prove­ments and sound­proof­ing meas­ures for roads ac­cord­ing to Art­icle 21 para­graph 1 let­ter b to the Fed­er­al Of­fice for the En­vir­on­ment.

2 The ap­plic­a­tion must in par­tic­u­lar con­tain in­form­a­tion on:

the roads or road sec­tions to be im­proved dur­ing the peri­od covered by the pro­gramme agree­ment;
the im­prove­ments and sound­proof­ing meas­ures planned and their cost;
the ef­fi­ciency of the meas­ures.
Art. 23 Programme agreement  

1 The Fed­er­al Of­fice for the En­vir­on­ment con­cludes the pro­gramme agree­ment with the can­ton­al au­thor­it­ies re­spons­ible.

2 The pro­gramme agree­ment cov­ers in par­tic­u­lar:

a.
the roads or road sec­tions to be im­proved;
b.
the amount paid by the Con­fed­er­a­tion;
c.
the con­trol pro­ced­ures.

3 The pro­gramme agree­ment ap­plies for four years; in jus­ti­fied cases a longer or short­er peri­od may be agreed.21

4 The Fed­er­al Of­fice for the En­vir­on­ment is­sues dir­ect­ives on the pro­ced­ure fol­lowed for pro­gramme agree­ments and on the in­form­a­tion and doc­u­ment­a­tion re­lat­ing to the sub­jects of the pro­gramme agree­ment.

21 Amended by No I of the O of 21 Feb. 2018, in force since 1 April 2018 (AS 2018 965).

Art. 24 Determination of the subsidy  

1 The amount of the sub­sidy for im­prove­ments is de­term­ined by:

a.
the num­ber of people who are pro­tec­ted by these meas­ures; and
b.
the re­duc­tion in noise pol­lu­tion.

2 For sound­proof­ing meas­ures on ex­ist­ing build­ings, CHF 400 is al­loc­ated per sound­proof win­dow or oth­er equally ef­fect­ive struc­tur­al noise pro­tec­tion meas­ure.

3 The amount of the sub­sidy is ne­go­ti­ated between the Con­fed­er­a­tion and the can­ton.

Art. 24a and 24b  

Re­pealed

Art. 25 Payment  

Glob­al sub­sidies are paid out in in­stal­ments.

Art. 26 Reports and controls  

1 The can­ton shall re­port an­nu­ally to the com­pet­ent Fed­er­al Of­fice on the use of the sub­sidies.

2 The Fed­er­al Of­fice for the En­vir­on­ment shall veri­fy by ran­dom sample:

im­ple­ment­a­tion of in­di­vidu­al meas­ures in ac­cord­ance with the pro­gramme goals;
use of the pay­ments made.
Art. 27 Inadequate fulfilment and misuse of subsidies  

1 The Fed­er­al Of­fice for the En­vir­on­ment shall with­hold all or part of the in­stal­ment pay­ments dur­ing the pro­gramme if the can­ton:

fails to ful­fil its re­port­ing duty (Art. 26 para. 1);
fails to meet its ob­lig­a­tions to a sub­stan­tial ex­tent through its own fault.

2 If on con­clu­sion of the pro­gramme it emerges that the can­ton has failed to meet its ob­lig­a­tions, the com­pet­ent Fed­er­al Of­fice shall re­quire the can­ton to rec­ti­fy the situ­ation; it shall set the Can­ton an ap­pro­pri­ate dead­line for do­ing so.

3 If in­stall­a­tions for which sub­sidies have been made are used for a pur­pose oth­er than that in­ten­ded, the Fed­er­al Of­fice for the En­vir­on­ment may re­quire the can­ton to cease or make good the mis­use with­in a reas­on­able peri­od.

4 If the de­fects are not rec­ti­fied or the mis­use does not stop or is not remedied, the sub­sidies may be re­claimed in ac­cord­ance with Art­icles 28 and 29 of the Sub­sidies Act of 5 Oc­to­ber 199022.

Art. 28  

Re­pealed

Chapter 5 Requirements for Building Zones and Planning Permission in Areas exposed to Noise

Art. 29 Designation of new building zones and new zones with higher noise abatement requirements  

1 New build­ing zones for build­ings with rooms sens­it­ive to noise and new no-build zones with high­er noise abate­ment re­quire­ments shall be des­ig­nated only in areas in which noise ex­pos­ure does not ex­ceed the plan­ning val­ues or in which these val­ues can be com­plied with by plan­ning, design or struc­tur­al meas­ures.

2…23

23 Re­pealed by No I of the O of 16 June 1997, with ef­fect from 1 Aug. 1997 (AS 1997 1588).

Art. 30 Development of building zones 24  

Build­ing zones for build­ings with rooms sens­it­ive to noise that have not yet been de­veloped when the Act comes in­to force may only be de­veloped to the ex­tent that the plan­ning val­ues are com­plied with or can be com­plied with by a change in the type of use, or by plan­ning, design or struc­tur­al meas­ures. The en­force­ment au­thor­it­ies may grant ex­cep­tions for small sec­tions of build­ing zones.

24 Amended by No I of the O of 30 June 2010, in force since 1 Aug. 2010 (AS 20103223).

Art. 31 Planning permission in areas subject to noise  

1 If the im­pact thresholds are ex­ceeded, new build­ings and sig­ni­fic­ant modi­fic­a­tions to build­ings with rooms sens­it­ive to noise may only be au­thor­ised if the val­ues can be com­plied with:

by loc­at­ing the rooms sens­it­ive to noise on the side of the build­ing away from the source of the noise; or
by struc­tur­al or design meas­ures which shield the build­ing against noise.25

2 If the im­pact thresholds can­not be com­plied with by meas­ures un­der para­graph 1, plan­ning per­mis­sion may be gran­ted only if there is an over­rid­ing in­terest in con­struct­ing the build­ing and the can­ton­al au­thor­it­ies agree.

3 The landown­ers bear the costs of the meas­ures.

25 Amended by No I of the O of 16 June 1997, in force since 1 Aug. 1997 (AS 1997 1588).

Art. 31a Special provisions for airports used by large aircraft 26  

1 In the case of air­ports that are used by large air­craft, the plan­ning val­ues and im­pact thresholds un­der An­nex 5 num­ber 222 are com­plied with at night if:

a.
no flight op­er­a­tions are planned between 24 and 06 hours;
b.
rooms sens­it­ive to noise are pro­tec­ted against ex­ter­i­or and in­teri­or noise as a min­im­um in ac­cord­ance with the in­creased re­quire­ments for sound­proof­ing un­der SIA Stand­ard 181 of 1 June 200627 of the Swiss So­ci­ety of En­gin­eers and Ar­chi­tects; and
c.
the bed­rooms:
1.
have a win­dow that closes auto­mat­ic­ally between 22 and 24 hours and can be opened auto­mat­ic­ally at oth­er times, and
2.
are de­signed to guar­an­tee an ap­pro­pri­ate in­door cli­mate.

2 When des­ig­nat­ing or de­vel­op­ing build­ing zones, the com­pet­ent au­thor­ity shall en­sure that the re­quire­ments set out in para­graph 1 let­ters b and c are made bind­ing on prop­erty own­ers.

3 The Fed­er­al Of­fice for the En­vir­on­ment may is­sue re­com­mend­a­tions on the en­force­ment of para­graph 1 let­ter c. In do­ing so, it shall take ac­count of the rel­ev­ant tech­nic­al stand­ards.

26 In­ser­ted by No I of the O of 28 Nov. 2014, in force since 2 Feb. 2015 (AS 2014 4501).

27 The said stand­ard may be in­spec­ted free of charge at the Swiss So­ci­ety of En­gin­eers and Ar­chi­tects (SIA), Sel­naus­trasse 16, 8027Zurich, or ob­tained for a free from www.sia.ch.

Chapter 6 Soundproofing of New Buildings

Art. 32 Requirements  

1 The pro­ject own­er of a new build­ing shall en­sure that the sound­proof­ing of the ex­tern­al build­ing ele­ments and par­ti­tions of rooms sens­it­ive to noise, and of the stairs and build­ing fa­cil­it­ies com­plies with re­cog­nised codes of build­ing prac­tice. These are in par­tic­u­lar, for noise from civil aero­dromes that are used by heavy air­craft, the stricter re­quire­ments, and for noise from oth­er sta­tion­ary in­stall­a­tions, the min­im­um re­quire­ments, of SIA Stand­ard No 181 of the Swiss So­ci­ety of En­gin­eers and Ar­chi­tects.28

2 If the im­pact thresholds are ex­ceeded but the re­quire­ments of Art­icle 31 para­graph 2 for grant­ing plan­ning per­mis­sion are ful­filled, the en­force­ment au­thor­it­ies shall im­pose stricter re­quire­ments for the sound­proof­ing of the ex­tern­al build­ing ele­ments ap­pro­pri­ately.

3 The re­quire­ments also ap­ply to the ex­tern­al build­ing ele­ments, par­ti­tions, stair­ways and build­ing fa­cil­it­ies that are con­ver­ted, re­placed or newly in­stalled. On re­quest, the en­force­ment au­thor­it­ies grant re­lief if com­pli­ance with the re­quire­ments would in­volve un­reas­on­able cost.

28 Sen­tence amended by No I of the O of 12 April 2000, in force since 1 May 2000 (AS 20001388).

Art. 33 External building elements, partitions and building facilities  

1 Ex­tern­al build­ing ele­ments form the ex­tern­al bound­ary of a room (e.g. win­dows, ex­tern­al doors, ex­tern­al walls, roofs).

2 Par­ti­tions (e.g. in­tern­al walls, ceil­ings, doors) serve to sep­ar­ate in­di­vidu­al units, such as dwell­ings, with­in the build­ing.

3 Build­ing fa­cil­it­ies are fixed in­stall­a­tions such as heat­ing, vent­il­a­tion, sup­ply and dis­pos­al sys­tems, lifts and wash­ing ma­chines.

Art. 34 Application for planning permission  

1 The pro­ject own­er must spe­cify in the ap­plic­a­tion:

a.
the ex­ter­i­or noise pol­lu­tion in the event that the im­pact thresholds are ex­ceeded;
b.
the use to which the rooms are put;
c.
the ex­tern­al build­ing ele­ments and par­ti­tions of rooms sens­it­ive to noise.

2 For build­ing pro­jects in areas in which the im­pact thresholds are ex­ceeded, the en­force­ment au­thor­it­ies may de­mand de­tails of the sound­proof­ing of the ex­tern­al build­ing ele­ments.

Art. 35 Inspections  

After build­ing works are com­pleted, the en­force­ment au­thor­it­ies shall make ran­dom checks to veri­fy wheth­er the sound­proof­ing meas­ures com­ply with the re­quire­ments. In the event of any doubt, they must carry out a more de­tailed in­spec­tion.

Chapter 7 Investigation, Assessment and Control of Exposure to Exterior Noise due to Stationary Installations 29

29 Amended by No I of the O of 1 Sept. 2004, in force since 1 Oct. 2004 (AS 2004 4167).

Section 1 Investigation

Art. 36 Obligation to investigate 30  

1 The en­force­ment au­thor­it­ies shall in­vest­ig­ate the ex­pos­ure to ex­ter­i­or noise due to sta­tion­ary in­stall­a­tions, or or­der its in­vest­ig­a­tion if they have grounds to be­lieve that the rel­ev­ant ex­pos­ure lim­it val­ues are be­ing ex­ceeded or that this is to be ex­pec­ted.

2 They shall take ac­count of in­creases and re­duc­tions in noise ex­pos­ure levels that are to be ex­pec­ted due to:

the con­struc­tion, al­ter­a­tion or im­prove­ment of sta­tion­ary in­stall­a­tions, in par­tic­u­lar if the pro­jects in ques­tion have already been ap­proved or made avail­able for pub­lic in­spec­tion at the time of the in­vest­ig­a­tion; and
the con­struc­tion, al­ter­a­tion or de­moli­tion of oth­er struc­tures if the pro­jects have been made avail­able for pub­lic in­spec­tion at the time of the in­vest­ig­a­tion.

331

30 Amended by No I of the O of 1 Sept. 2004, in force since 1 Oct. 2004 (AS 2004 4167).

31 Re­pealed by Art. 15 of the O of 4 Dec. 2015 on Rail­way Noise Abate­ment Meas­ures, with ef­fect from 1 Jan. 2016 (AS 2015 5691).

Art. 37 Noise pollution register 32  

1 In the case of roads, rail­way in­stall­a­tions, aero­dromes and mil­it­ary fir­ing ranges and train­ing grounds, the en­force­ment au­thor­it­ies shall re­cord in spe­cif­ic re­gisters (noise pol­lu­tion re­gisters) the noise ex­pos­ure levels meas­ured in ac­cord­ance with Art­icle 36.33

2 The noise pol­lu­tion re­gisters spe­cify:

the noise pol­lu­tion meas­ured;
the cal­cu­la­tion pro­ced­ure used;
the in­put data for the cal­cu­la­tion;
the clas­si­fic­a­tion of the areas ex­posed to noise in the land use plan;
the sens­it­iv­ity levels ap­plic­able;
the in­stall­a­tions and their own­ers;
the num­ber of per­sons who are af­fected by noise ex­pos­ure levels above the ap­plic­able ex­pos­ure lim­it val­ues.

3 The en­force­ment au­thor­it­ies are re­spons­ible for the su­per­vi­sion and re­vi­sion of the re­gisters.

4 On re­quest, they sub­mit the noise pol­lu­tion re­gisters to the Fed­er­al Of­fice for the En­vir­on­ment. The Of­fice may is­sue re­com­mend­a­tions on the stand­ard­ised re­cord­ing and present­a­tion of the data.

5 The Fed­er­al Of­fice for Civil Avi­ation is re­spons­ible for meas­ure­ment of noise ex­pos­ure levels pro­duced by Basel Mul­house Air­port on Swiss ter­rit­ory.

6 Any per­son may have ac­cess to the noise pol­lu­tion re­gister provided that con­fid­en­ti­al­ity with re­spect to man­u­fac­tur­ing and busi­ness secrets is en­sured, and no con­flict with oth­er in­terests that over­ride ex­ists.

32 Amended by No I of the O of 1 Sept. 2004, in force since 1 Oct. 2004 (AS 2004 4167).

33 Amended by No I of the O of 30 June 2010, in force since 1 Aug. 2010 (AS 20103223).

Art. 37a Determination and control of noise exposure levels 34  

1 The en­force­ment au­thor­it­ies state the per­mit­ted noise ex­pos­ure level in their de­cision on the con­struc­tion, al­ter­a­tion or im­prove­ment of an in­stall­a­tion.

2 If it is es­tab­lished or an­ti­cip­ated that the noise ex­pos­ure levels due to an in­stall­a­tion will de­vi­ate sig­ni­fic­antly and per­man­ently from those quoted in the de­cision, the en­force­ment au­thor­it­ies shall take the ne­ces­sary meas­ures.

3 The Fed­er­al Of­fice for the En­vir­on­ment may is­sue re­com­mend­a­tions on the stand­ard­ised re­cord­ing and present­a­tion of the noise ex­pos­ure levels in these de­cisions.

34 In­ser­ted by No I of the O of 12 April 2000 (AS 20001388). Amended by No I of the O of 1 Sept. 2004, in force since 1 Oct. 2004 (AS 2004 4167).

Art. 38 Method of determination  

1 Noise ex­pos­ure levels are de­term­ined in the form of a rat­ing sound level, Lr, or a max­im­um sound level, Lmax, on the basis of cal­cu­la­tions or meas­ure­ments.35

2 Noise ex­pos­ure levels due to air­craft shall prin­cip­ally be de­term­ined by cal­cu­la­tion. The cal­cu­la­tions are car­ried out us­ing re­cog­nised state-of-the-art meth­ods. The Fed­er­al Of­fice for the En­vir­on­ment shall re­com­mend suit­able cal­cu­la­tion pro­ced­ures.36

3 The re­quire­ments for cal­cu­la­tion pro­ced­ures and meas­ur­ing in­stru­ments are giv­en in An­nex 2.37

35 Amended by No I of the O of 1 Sept. 2004, in force since 1 Oct. 2004 (AS 2004 41674313).

36 In­ser­ted by No I of the O of 12 April 2000, in force since 1 May 2000 (AS 20001388).

37 Ori­gin­ally para. 2.

Art. 39 Point of determination  

1 For build­ings, noise ex­pos­ure levels shall be de­term­ined at the centre of open win­dows in rooms sens­it­ive to noise. Noise ex­pos­ure levels due to air­craft may also be de­term­ined in the vi­cin­ity of the build­ing.38

2 In the non-de­veloped sec­tor of zones with high­er noise abate­ment re­quire­ments, noise ex­pos­ure levels shall be meas­ured 1.5 m above the ground.

3 In build­ing zones that have not yet been de­veloped, noise ex­pos­ure levels shall be meas­ured at points where the build­ing and plan­ning le­gis­la­tion al­lows the build­ing of rooms sens­it­ive to noise.

38 The cor­rec­tion of 7 May 2019 con­cerns the French text only (AS 2019 1337).

Section 2 Rating

Art. 40 Exposure limit values  

1 The en­force­ment au­thor­it­ies shall rate the ex­pos­ure to ex­ter­i­or noise due to sta­tion­ary in­stall­a­tions on the basis of the ex­pos­ure lim­it val­ues spe­cified in An­nexes 3 ff.

2 The ex­pos­ure lim­it value, it is also con­sidered ex­ceeded if it is less than the sum of the levels of ex­pos­ure to sim­il­ar types of noise gen­er­ated by sev­er­al in­stall­a­tions. This does not ap­ply to the plan­ning val­ues for new sta­tion­ary in­stall­a­tions (Art. 7 para. 1).

3 In the ab­sence of ex­pos­ure lim­it val­ues, the en­force­ment au­thor­it­ies shall rate the noise ex­pos­ure levels in ac­cord­ance with Art­icle 15 of the Act. They shall also take ac­count of Art­icles 19 and 23 of the Act.

Art. 41 Validity of the exposure limit values  

1 The ex­pos­ure lim­it val­ues ap­ply to build­ings with rooms sens­it­ive to noise.

2 They also ap­ply:

in yet un­developed build­ing zones in areas where the con­struc­tion of build­ings with rooms sens­it­ive to noise is al­lowed un­der the build­ing and plan­ning le­gis­la­tion;
in the non-de­veloped areas of zones with high­er noise abate­ment re­quire­ments.

3 For areas and build­ings in which, as a rule, people are present either only dur­ing the day or only at night, no ex­pos­ure lim­it val­ues ap­ply at night or dur­ing the day.

Art. 42 Special exposure limit values for rooms in industrial buildings  

1 For rooms in in­dus­tri­al build­ings (Art. 2 para. 6 let. b) ly­ing in areas of sens­it­iv­ity levels I, II or III, the plan­ning and im­pact thresholds shall be in­creased by 5 dB(A).

2 Para­graph 1 does not ap­ply to rooms in schools, in­sti­tu­tions and homes. It ap­plies to ho­tels and gues­t­houses only if these can be ad­equately vent­il­ated when the win­dows are closed.

Art. 43 Sensitivity levels  

1 In land use zones ac­cord­ing to Art­icles 14 ff. of the Spa­tial Plan­ning Act of 22 June 197939, the fol­low­ing sens­it­iv­ity levels ap­ply:

sens­it­iv­ity level I in zones with high­er noise abate­ment re­quire­ments, not­ably in leis­ure zones;
sens­it­iv­ity level II in zones in which op­er­a­tions that emit noise are not per­mit­ted, not­ably in res­id­en­tial zones and zones for pub­lic build­ings and in­stall­a­tions;
sens­it­iv­ity level III in zones in which op­er­a­tions emit­ting a cer­tain level of noise are per­mit­ted, not­ably in res­id­en­tial and in­dus­tri­al zones (mixed zones) and ag­ri­cul­tur­al zones;
sens­it­iv­ity level IV in zones in which op­er­a­tions emit­ting a high level of noise are per­mit­ted, not­ably in in­dus­tri­al zones.

2 Parts of land use zones rated as sens­it­iv­ity levels I or II may be as­signed the next high­er level if they are already ex­posed to noise.

Art. 44 Procedures  

1 The can­tons shall en­sure that sens­it­iv­ity levels are as­signed to the land use zones in the build­ing reg­u­la­tions or land use plans of the com­munes.

2 The sens­it­iv­ity levels are as­signed at the time of des­ig­na­tion or modi­fic­a­tion of the land use zones, or at the time of modi­fic­a­tion of the build­ing reg­u­la­tions.40

3 Pri­or to as­sign­ment, the can­tons shall de­term­ine the sens­it­iv­ity levels on a case by case basis in ac­cord­ance with Art­icle 43.

441

40 Amended by No IV 31 of the O of 22 Aug. 2007 on the Form­al Re­vi­sion of Fed­er­al Le­gis­la­tion, in force since 1 Jan. 2008 (AS 20074477).

41Re­pealed by No 1 of the O of 27 June 1995, with ef­fect from 1 Aug. 1995 (AS 1995 3694).

Chapter 8 Final Provisions

Section 1 Enforcement

Art. 45 Responsibilities of the Confederation and the cantons 4243  

1 The can­tons shall en­force this Or­din­ance un­less it del­eg­ates en­force­ment to the Con­fed­er­a­tion.

2 If the fed­er­al au­thor­it­ies ap­ply oth­er fed­er­al laws or in­ter­na­tion­al treat­ies or de­cisions that re­late to the sub­ject mat­ter of this Or­din­ance, they shall also en­force this Or­din­ance. The co­oper­a­tion of the Fed­er­al Of­fice for the En­vir­on­ment and the can­tons is gov­erned by Art­icle 41 para­graphs 2 and 4 of the Act; stat­utory du­ties of secrecy are re­served.

3 The fol­low­ing au­thor­it­ies are re­spons­ible for en­for­cing the pro­vi­sions gov­ern­ing emis­sion lim­it­a­tion meas­ures (Art. 4, 7–9 and 12), im­prove­ments (Art. 13, 14, 16–18 and 20) and the de­term­in­a­tion and con­trol of noise ex­pos­ure levels (Art. 36, 37, 37a and 40):

for rail­way in­stall­a­tions:
DE­TEC, where the pro­vi­sions re­late to ma­jor rail­way pro­jects un­der the An­nex to the Rail­ways Act of 20 Decem­ber 195744 and are im­ple­men­ted by means of a plan­ning ap­prov­al pro­ced­ure,
in oth­er cases, the Fed­er­al Of­fice of Trans­port;
for civil aero­dromes:
DE­TEC, where the pro­vi­sions re­late to build­ings and in­stall­a­tions un­der Art­icle 37 of the Air Nav­ig­a­tion Act of 21 Decem­ber 194845 that are used for op­er­a­tion of an aero­drome and are im­ple­men­ted by means of a plan­ning ap­prov­al pro­ced­ure,
in oth­er cases, the Fed­er­al Of­fice of Civil Avi­ation;
for na­tion­al roads:
DE­TEC, where the pro­vi­sions are im­ple­men­ted by means of a plan­ning ap­prov­al pro­ced­ure,
in oth­er cases the Fed­er­al Roads Of­fice;
for na­tion­al de­fence in­stall­a­tions: the Fed­er­al De­part­ment of De­fence, Civil Pro­tec­tion and Sport;
for elec­tric­al in­stall­a­tions:
the Swiss Fed­er­al Of­fice of En­ergy in cases where the Fed­er­al In­spect­or­ate for Heavy Cur­rent In­stall­a­tions (ESTI) has been un­able to deal with ob­jec­tions from or re­solve dis­putes with the Fed­er­al au­thor­it­ies con­cerned, in ac­cord­ance with Art­icle 16 para­graph 2 let­ter b of the Elec­tri­city Act of 24 June 190246,
in oth­er cases the ESTI;
for cable rail­way in­stall­a­tions ac­cord­ing to Art­icle 2 of the Cable Rail­ways Act of 23 June 200647: the Fed­er­al Of­fice of Trans­port48.

4 In cases where the re­spons­ib­il­ity for or­der­ing emis­sion lim­it­a­tion meas­ures and im­prove­ments lies with the fed­er­al au­thor­it­ies, but that for noise pro­tec­tion lies with the can­ton­al au­thor­it­ies, the two au­thor­it­ies shall co­ordin­ate the ne­ces­sary meas­ures.

5 For na­tion­al roads, DE­TEC is also re­spons­ible for en­for­cing the pro­vi­sions gov­ern­ing sound­proof­ing meas­ures (Art. 10 and 15). It co­ordin­ates the en­force­ment of these pro­vi­sions with the sound­proof­ing meas­ures that are ar­ranged by the can­tons.49

42 Amended by No II 14 of the O of 2 Feb. 2000 to the Fed­er­al Act on the Co­ordin­a­tion and Sim­pli­fic­a­tion of De­cision-mak­ing Pro­ced­ures, in force since 1 March 2000 (AS 2000 703).

43 In­ser­ted by An­nex 2 No 9 of the O of 21 May 2008 on Geoin­form­a­tion, in force since 1 Ju­ly 2008 (AS 2008 2809).

44 SR 742.101

45 SR 748.0

46 SR 734.0

47 SR 743.01

48 Amended by No I of the O of 30 June 2010, in force since 1 Aug. 2010 (AS 2010 3223).

49 In­ser­ted by No I of the O of 30 June 2010, in force since 1 Aug. 2010 (AS 2010 3223).

Art. 45a National noise pollution survey 50  

The Fed­er­al Of­fice for the En­vir­on­ment shall con­duct a na­tion­al sur­vey of noise pol­lu­tion. It shall pub­lish a geo-ref­er­enced present­a­tion of the noise pol­lu­tion in par­tic­u­lar for road, rail­way and air­craft noise and for noise from mil­it­ary fir­ing ranges and train­ing grounds. It shall up­dates this present­a­tion at least every five years.

50 In­ser­ted by No I of the O of 30 June 2010, in force since 1 Aug. 2010 (AS 2010 3223).

Art. 46 Geoinformation 51  

The Fed­er­al Of­fice for the En­vir­on­ment shall provide spe­cific­a­tions for the min­im­al geodata mod­els and present­a­tion mod­els for of­fi­cial geodata un­der this Or­din­ance, for which it is des­ig­nated as the fed­er­al spe­cial­ist au­thor­ity in An­nex 1 to the Geoin­form­a­tion Or­din­ance of 21 May 200852.

51 Amended by An­nex 2 No 9 of the O of 21 May 2008 on Geoin­form­a­tion, in force since 1 Ju­ly 2008 (AS 2008 2809).

52 SR 510.620

Section 2 Transitional Provisions

Art. 47 Stationary installations and buildings 53  

1 Sta­tion­ary in­stall­a­tions are deemed to be new sta­tion­ary in­stall­a­tions if the de­cision au­thor­ising the start of build­ing work has not yet taken full leg­al ef­fect when this Or­din­ance comes in­to force.

2 For sta­tion­ary in­stall­a­tions that are to be mod­i­fied, Art­icles 8-12 ap­ply only if the de­cision au­thor­ising the modi­fic­a­tion has not yet taken full leg­al ef­fect when this Or­din­ance comes in­to force.

3 Build­ings are deemed to be new build­ings if plan­ning per­mis­sion has not yet taken full leg­al ef­fect when this Or­din­ance comes in­to force.

4 For build­ings that must be mod­i­fied, Art­icles 31 and 32 para­graph 3 ap­ply only if plan­ning per­mis­sion has not yet taken full leg­al ef­fect when this Or­din­ance comes in­to force.

53 Amended by No I of the O of 23 Aug. 2006, in force since 1 Nov. 2006 (AS 20063693).

Art. 4854  

54 Re­pealed by No I of the O of 30 June 2010, with ef­fect from 1 Aug. 2010 (AS 2010 3223).

Art. 48a55  

55 In­ser­ted by No I of the O of 1 Sept. 2004 (AS 2004 4167). Re­pealed by No I of the O of 21 Feb. 2018, with ef­fect from 1 April 2018 (AS 2018 965).

Art. 4956  

56 Re­pealed by No IV 31 of the O of 22 Au­gust 2007 on the Form­al Re­vi­sion of Fed­er­al Le­gis­la­tion, with ef­fect from 1 Jan. 2008 (AS 20074477).

Section 3 Commencement

Art. 50  

This Or­din­ance comes in­to force on 1 April 1987.

Annex 1 57

57 Amended by No II of the O of 23 Aug. 2006, in force since 1 Nov. 2006 (AS 2006 3693)

(Art. 10 para. 1 and 15 para. 1)

Requirements for Soundproofing of Windows

1 The weighted sound reduction index for the building, including the spectrum-adjustment factor, R’w + (C or Ctr), measured on site of the windows and related elements such as roller-shutter boxes and quiet ventilators must be at least equal to the following minimum values, depending on the relevant rating sound level Lr:

Lr in dB(A)

R’w + (C or Ctr) in dB

Day

Night

up to 75

up to 70

32

over 75

over 70

38

2 R’w is equal to at least 35 dB and at most 41 dB.

3 For particularly large windows, the enforcement authorities shall impose appropriate requirements that are stricter than paragraphs 1 and 2.

4 The weighted sound reduction index for buildings, R’w, and the spectrum-adjustment factor, C or Ctr, are determined according to the recognised rules, in particular the ISO 140 and ISO 717 standards of the International Standards Organisation.

5 The spectrum-adjustment factor Ctr applies to predominantly low frequency noise, in particular from roads with a maximum speed of up to 80 km/h and from airfields. The spectrum-adjustment factor C applies to predominantly high frequency noise, in particular from roads with a maximum speed above 80 km/h and from railways.

6 The enforcement authorities may order the installation of quiet ventilators in bedrooms.

Annex 2 58

58 Amended by No II para. 1 of the O of 23 Aug. 2006 (AS 2006 3693). Revised in accordance with No II para. 1 of the O of 30 June 2010, in force since 1 Aug. 2010 (AS 2010 3223).

(Art. 38 para. 3)

Requirements for the Calculation Procedures and Measuring Instruments

1 Calculation Procedures

1 The procedures used to calculate noise exposure levels must take account of:

the emissions from the noise source of the installation;
the distance between the exposure point and the noise source of the installation or the flight paths (attenuation due to propagation and dissipation);
the influence of the ground on the propagation of the noise (ground effects);
the influence of buildings and natural obstacles on the propagation of the noise (attenuation due to obstacles and reflection).

2 The Federal Office for the Environment (FOEN) recommends suitable state-of-the-art calculation procedures to the enforcement authorities.

2 Measuring Instruments

The requirements of the Measuring Instruments Ordinance of 15 February 200659 and the corresponding implementing provisions of the Federal Justice and Police Department apply to the instruments used to measure noise exposure levels.

Annex 3

(Art. 40 para. 1)

Exposure Limit Values for Road Traffic Noise

1 Scope

The exposure limit values specified in Number 2 apply to road traffic noise. This includes noise on roads from motor vehicles (motor vehicle noise) and railways (railway noise).

2 Exposure limit values

Sensitivity level (Art. 43)

Planning value

Lr in dB(A)

Impact threshold

Lr in dB(A)

Alarm value

Lr in dB(A)

Day

Night

Day

Night

Day

Night

I

50

40

55

45

65

60

II

55

45

60

50

70

65

III

60

50

65

55

70

65

IV

65

55

70

60

75

70

3 Determination of the Rating Sound Level

31 Principles

1 The rating sound level Lr for road traffic noise is determined from the partial rating sound levels for motor vehicle noise (Lr1) and railway noise (Lr2) as follows:

Lr = 10 x log (100,1 x Lr1 + 100,1 x Lr2 )

2 The partial rating sound level Lr1 is the sum of the equivalent continuous A‑weighted sound level Leq,m resulting from motor vehicles, and the level correction K1:

Lr1 = Leq,m + K1

3 The partial rating sound level Lr2 is the sum of the equivalent continuous A‑weighted sound level Leq,b resulting from the railways, and the level correction K2:

Lr2 = Leq,b + K2

4 The partial rating sound levels Lr1 and Lr2 are determined for average day and night traffic flows assuming a dry road surface.

32 Average Day and Night Traffic

1 The average day and night traffic is defined as the annual average of the hourly traffic between 06 and 22 hours and between 22 and 06 hours.

2 The hourly motor vehicle traffic during the day (Nt) and at night (Nn) are each divided into two partial traffic flows, Nt1 and Nt2, and Nn1 and Nn2, respectively.

3 The partial traffic flows Nt1 and Nn1 for motor vehicle traffic include private cars, delivery vehicles, minibuses, motorcycles and trolley buses.

4 The partial traffic flows Nt2 and Nn2 for motor vehicle traffic comprise lorries, articulated lorries, coaches, motorcycles and tractors.

5 Railway traffic comprises all scheduled and non-scheduled trains, including service journeys.

33 Determination of Average Day and Night Motor Vehicle Traffic

1 The average day and night traffic (Nt, Nn) and the partial traffic flows (Nt1, Nt2, Nn1, Nn2) are determined:

from traffic surveys for existing roads;
from forecasts of traffic volume for roads which are to be built or modified.

2 Where insufficient data is available from traffic surveys, or no detailed forecasts exist, the traffic flows Nt, Nn, Nt1, Nt2, Nn1 and Nn2 are calculated from the average daily traffic (ADT; vehicles per 24 h) as follows:

Nt = 0.058 ADT Nn = 0.009 ADT

Nt1 = 0.90 Nt Nn1 = 0.95 Nn

Nt2 = 0.10 Nt Nn2 = 0.05 Nn

3 The ADT is determined according to the recognised principles of traffic planning and traffic technology.

34 Determination of the Average Day and Night Traffic for Railways

The average day and night traffic for railways is determined:

from the timetable and traffic data for existing railway installations;
from traffic volume forecasts for railway installations which are to be built or modified.

35 Level Corrections

1 The level correction K1 for motor vehicle noise is calculated as follows from the average day and night traffic:

K1 = –5 for N < 31.6

K1 = 10 log(N/100) for 31.6 ≤ N ≤ 100

K1 = 0 for N > 100

Here, N stands for the hourly motor vehicle traffic Nt or Nn.

2 The K2 level correction for railway noise is equal to -5. For screeching railway noise that occurs frequently and is clearly audible, the K2 level correction is equal to 0.

Annex 4

(Art. 40 para. 1)

Exposure Limit Values for Railway Noise

1 Scope

1 The exposure limit values specified in Number 2 apply to the noise from standard and narrow gauge railways.

2 Noise on roads arising from railways is considered equivalent to road traffic noise (Annex 3 Number 1).

3 The noise from cable railways and railway workshops, energy installations and similar railway works, is considered equivalent to noise from industrial and commercial installations (Annex 6 Number 1).

2 Exposure Limit Values

Sensitivity level
(Art. 43)

Planning value

Lr in dB(A)

Impact threshold

Lr in dB(A)

Alarm value

Lr in dB(A)

Day

Night

Day

Night

Day

Night

I

50

40

55

45

65

60

II

55

45

60

50

70

65

III

60

50

65

55

70

65

IV

65

55

70

60

75

70

3 Determination of the Rating Sound Level

31 Principles

1 The rating sound level Lr for railway noise is determined from the partial rating sound levels for vehicle noise (Lr1) and shunting noise (Lr2) as follows:

Lr = 10 x log (100,1 x Lr1 + 100,1 x Lr2)

2 The partial rating sound level Lr1 is the sum of the equivalent continuous A‑weighted sound level Leq,f resulting from vehicle operation, and the level correction K1:

Lr1 = Leq,f + K1

3 The partial rating sound level Lr2 is the sum of the equivalent continuous A‑weighted sound level Leq,r resulting from shunting, and the level correction K2:

Lr2 = Leq,r + K2

4 The partial rating sound levels Lr1 and Lr2 are determined for average day and night traffic flows.

32 Average Day and Night Operations

1 Average day and night operations are hauling and shunting operations from 06 to 22 hours and from 22 to 06 hours respectively, averaged over the year.

2 Vehicle operations comprise all scheduled and non-scheduled trains, including service journeys.

3 Shunting comprises all shunting movements and operations intended for the purpose of connecting and disconnecting trains.

4 Vehicle operations and shunting are determined:

a. from the timetable and operating data for existing railway installations;
b. from operational forecasts for railway installations which are to be built or modified.

33 Level Corrections

1 The level correction K1 for transport noise is calculated as follows:

K1 = –15 for N < 7.9

K1 = 10 log (N/250) for 7.9 ≤ N ≤ 79

K1 = −5 for N > 79

Here, N stands for the number of train journeys per day or night.

2 The level correction K2 for shunting noise is based on the frequency and audibility of all pulsating, tonal and screeching types of noise, and is equal to:

Audibility of all types of noise

Frequency of all types of noise

Seldom

Occasional

Frequent

Weak

0

2

4

Clear

2

4

6

Strong

4

6

8

Annex 5 60

60 Amended by No I of the O of 30 May 2001 (AS 2001 1610). Revised in accordance with No II para. 1 of the O of 30 June 2010, in force since 1 Aug. 2010 (AS 2010 3223).

(Art. 40 para. 1)

Exposure Limit Values for Noise from Civil Aerodromes

1 Scope and Definitions

1 The exposure limit values specified in Number 2 apply to the noise from civil air transport at civil aerodromes.

2 Civil aerodromes means the national airports in Basel, Geneva and Zurich, the other licensed aerodromes and the airfields.

3 Light aircraft means an aircraft having a maximum permissible take-off weight of 8618 kg or less.

4 Heavy aircraft means an aircraft having a maximum permissible take-off weight of over 8618 kg.

5 The noise from repair workshops, maintenance works and similar operations at civil aerodromes is considered equivalent to the noise from industrial and commercial installations (Annex 6 Sec. 1).

2 Exposure Limit Values

21 Exposure Limit Values for Light Aircraft Traffic Noise, expressed as Lrk

Sensitivity level
(Art. 43)

Planning value

Impact threshold

Alarm value

Lrk in dB(A)
Lrk in dB(A)

Lrk in dB(A)

I

50

55

65

II

55

60

70

III

60

65

70

IV

65

70

75

22 Exposure Limit Values for Total Traffic Noise from Light and Heavy Aircraft, expressed as Lr

For the total traffic noise from civil aerodromes used by heavy aircraft, the following exposure limit values apply in addition to the exposure limits expressed as Lrk:

221 Daytime Exposure Limit Values (06-22 hours), expressed as Lrt

Sensitivity level
(Art. 43)

Planning value

Impact threshold

Alarm value

Lrt in dB(A)

Lrt in dB(A)

Lrt in dB(A)

I

53

55

60

II

57

60

65

III

60

65

70

IV

65

70

75

222 Night Time Exposure Limit Values for the first (22-23 hours), the second (23-24 hours) and the last night hour (05-06 hours), expressed as Lrn

Sensitivity level
(Art. 43)

Planning value

Impact threshold

Alarm value

Lrn in dB(A)

Lrn in dB(A)

Lrn in dB(A)

I

43

45

55

II

47/501

50/551

60/651

III

50

55

65

IV

55

60

70

1 The higher value applies for the first night hour (22-23 hours)

23 Exposure Limit Values expressed as max

For civil aerodromes used exclusively by helicopters (heliports), the following exposure limit values, expressed as max, apply in addition to the exposure limits expressed as Lrk:

Sensitivity level
(Art. 43)

Planning value

Impact threshold

Alarm value

in dB(A)

in dB(A)

in dB(A)

I

70

75

85

II

75

80

90

III

80

85

90

IV

85

90

95

3 Determination of the Rating Sound Level Lrk for Light Aircraft Noise

31 Principles

1 The rating sound level Lrk for light aircraft noise is the sum of the equivalent continuous A-weighted sound level Leqk and the level correction K:

Lrk = Leqk + K

2 The equivalent continuous sound level Leqk is determined for the average number of hourly aircraft movements (number of movements n) for a day with average peak operations.

3 Aircraft movements are all landings and takeoffs of light aircraft. Go-arounds count as two flight movements.

32 Number of Aircraft Movements n for existing Civil Aerodromes

For existing civil aerodromes, the number of aircraft movements n is determined as follows:

the six months with the greatest amount of traffic during the operating year are identified;
for these six months, the average daily number of flight movements is determined separately for each of the seven days of the week. The average daily values for the two days of the week with the most traffic are designated as N1 and N2;
n is determined by averaging N1 and N2 over the twelve daytime hours as follows:
n = (N1 + N2)/24

33 Number of Aircraft Movements n for new Civil Aerodromes

1 For civil aerodromes which are to be built or modified, the number of flight movements n is determined from forecasts of traffic volume.

2 If no detailed forecasts can be made, n is calculated from the forecasted annual number of aircraft movements N as follows:

n = (N x 2,4)/(365 x 12)

34 Level Corrections

The level correction K is calculated from the annual number of aircraft movements N as follows:

K = 0 for N < 15 000

K = 10 x log (N/15 000) for N ≥ 15 000

4 Determination of the Rating Sound Level Lr for Traffic at Civil Aerodromes used by Heavy Aircraft

41 Principles

1 At civil aerodromes used by heavy aircraft, the rating sound level Lr of total traffic is determined based on the relevant aircraft traffic, whereby separate calculations are made for daytime (06-22 hours), and for the first (22-23 hours), second (23-24 hours) and last (05-06 hours) night hours.

2 At civil aerodromes used by heavy aircraft, the daytime rating sound level for total traffic Lrt is calculated from the rating sound levels for light aircraft Lrk and heavy aircraft Lrg as follows:

Lrt = 10 x log (10 0,1 xLrk+ 10 0,1 xLrg)

3 For heavy aircraft noise, the daytime rating sound level is the sum of the equivalent continuous A-weighted sound level Leqg arising from aircraft operations between 06 and 22 hours, averaged over one year:

Lrg = Leqg

4 For heavy aircraft noise, the rating sound level Lrn for the first, the second and the last night hour is the equivalent continuous A-weighted sound level Leqn, each averaged over one hour, arising from aircraft operations during the periods 22-23, 23-24 hours and 05-06 hours, averaged over one year:

Lrn = Leqn

42 Relevant Aircraft Traffic

1 The equivalent continuous sound levels Leqg and Leqn are determined from the operational data.

2 For civil aerodromes that are to be built or modified, the relevant aircraft traffic is determined from forecasts of traffic volume.

3 Flights taking place after the second night hour (23-24 hours) and before the last night hour (05-06) are assigned to the second night hour (23-24 hours).

5 Determination of the Average Maximum Noise Level max for Heliports

1 The average maximum noise level max for heliports is the energetic average of the maximum noise level of a representative number of passing flights or overflights.

2 Measurements of max are carried out with the instruments set on SLOW.

Annex 6

(Art. 40 para. 1)

Exposure Limit Values for Industrial and Commercial Noise

1 Scope

1 The exposure limit values specified in Number 2 apply to noise:

from industrial, commercial and agricultural installations;
from goods handling in industrial, commercial and agricultural installations and at railway stations, aerodromes, etc.;
from traffic within the perimeter of industrial and commercial installations and farmyards;
from multi-storey car parks and from larger off-road car parks;
from heating, ventilation and air-conditioning installations.

2 Energy, waste processing and transport installations, aerial cableways and cable railways, ski lifts and racing tracks that are used regularly for sustained periods of time are considered equivalent to industrial and commercial installations.

2 Exposure Limit Values

Sensitivity level
(Art. 43)

Planning value

Lr in dB(A)

Impact threshold

Lr in dB(A)

Alarm value

Lr in dB(A)

Day

Night

Day

Night

Day

Night

I

50

40

55

45

65

60

II

55

45

60

50

70

65

III

60

50

65

55

70

65

IV

65

55

70

60

75

70

3 Determination of the Rating Sound Level

31 Principles

1 The rating sound level Lr for industrial, commercial and similar types of noise is determined from the partial rating sound levels Lr,i for each noise phase as follows, whereby separate calculations are made for daytime (07 to 19 hours) and night-time (19 to 07 hours):

2 The partial rating sound level Lr,i is determined for the average daily duration of the noise phase i as follows:

Lr,i = Leq,i + K1,i + K2,i + K3,i + 10 x log (ti/to)

where:

Leq,i is the equivalent continuous A-weighted sound level during the noise phase i;

K1,i is the level correction for the noise phase i;

K2,i is the level correction for the noise phase i;

K3,i is the level correction for the noise phase i;

ti is the average daily duration of the noise phase i in minutes;

to = 720 minutes.

3 Noise phases are time periods in which the exposure point is subject to uniform noise with respect to sound level, frequency and pulse content.

32 Average Daily Duration of Noise Phases

1 The average daily duration (ti) of the noise phase i is calculated from its annual duration (Ti) and the annual number of working days (B) as follows:

ti = Ti/B

2 For new or modified installations, the average daily duration of the noise phase i is determined from operational forecasts.

33 Level Corrections

1 Value of the level correction K1:

a.
for noise according to Number 1 paragraph 1 letters a and b

5

b.
for noise according to Number 1 paragraph 1 letter c

0

c.
for noise according to with Number 1 paragraph 1 letter d

0 by day

5 at night

d.
for noise according to Number 1 paragraph 1 letter e

5 by day

10 at night.

2 The level correction K2 takes account of the audibility of the tonality content of the noise at the point of exposure and is equal to:

a.
for non-audible tonality content 0
b.
for weakly audible tonality content 2
c.
for clearly audible tonality content 4
d.
for strongly audible tonality content 6.

3 The level correction K3 takes account of the audibility of the pulse content of the noise at the point of exposure and is equal to:

a.
for non-audible pulse content 0
b.
for weakly audible pulse content 2
c.
for clearly audible pulse content 4
d.
for strongly audible pulse content 6.

Annex 7 61

61 Amended by No I of the O of 23 Aug. 2006 (AS 20063693.). Revised in accordance with No II para. 1 of the O of 30 June 2010, in force since 1 Aug. 2010 (AS 2010 3223).

(Art. 40 para. 1)

Exposure Limit Values for Noise from Civil Firing Range Installations

1 Scope

1 The exposure limit values specified in Number 2 apply to the noise from civil firing range installations at which only hand guns or small arms are used to fire at stationary or moving targets.

2 The hand guns or small arms used at the firing range installations are allocated to the following weapons categories:

assault rifles and portable firearms of comparable calibre;
small arms with centre fire cartridges, in particular ordnance pistols;
small arms with rim fire cartridges;
portable firearms with rim fire cartridges;
sporting guns with ball cartridges;
shotguns;
other firearms.

3 Firing range installations are public if they are used for shooting practice in accordance with Articles 62 and 63 of the Armed Forces Act of 3 February 199562.

2 Exposure Limit Values

Sensitivity level
(Art. 43)

Planning value

Impact threshold

Alarm value

Lr in dB(A)

Lr in dB(A)

Lr in dB(A)

I

50

55

65

II

55

60

75

III

60

65

75

IV

65

70

80

For noise from public installations according to Number 1 paragraph 363, at which, for weapons in categories a or b, the level correction Ki < –15, no alarm values apply. For such installations, no soundproofing measures under Article 15 are required. The level correction Ki is calculated as specified in Number 321.

63 The reference was amended on 1 Aug. 2010 pursuant to Art. 12 para. 2 of the Publications Act of 18 June 2004 (SR 170.512).

3 Determination of rating sound level

31 Principles

1 The rating sound level Lr for the noise from firing range installations is the energetic sum of the partial rating sound level Lri for the weapons categories:

2 The partial rating sound level Lri is the sum of the average single shot sound level Li of a weapons category and the level correction Ki:

Lri = Li + Ki

3 The average single shot sound level Li is the energetic average weighted according to the number of shots of the energetically averaged single shot sound level Lj of a type of weapon or type of ammunition:

4 The energetically averaged single shot sound level Lj must be determined using the measurements of the A-weighted maximum sound level with the FAST time constants.

Where:

Mj is the number of shots fired annually using a single type of weapon or a single type of ammunition of a weapons category, averaged over three years;

Mi is the number of shots fired annually using weapons of a single category, averaged over three years.

32 Level Correction

321 Calculation

1 The level correction Ki is calculated as follows:

Ki = 10 x log (Dwi + 3 x Dsi) + 3 x log Mi – 44

Where:

Dwi is the number of annual firing half-days falling on a weekday, averaged over three years, for each weapons category;

Dsi is the number of annual firing half-days falling on a Sunday or a general public holiday, averaged over three years, for each weapons category.

2 When determining the number of firing half-days and the number of shots, all exercises that take place regularly over a period of three years must be taken into account.

322 Determination of the number of firing half-days

1 Any firing exercise taking place in the morning or in the afternoon and lasting more than two hours counts as a firing half-day. Exercises lasting two hours or less count as half a firing half-day.

2 For new or modified firing range installations, the number of firing half-days is determined on the basis of operational forecasts. For existing firing range installations, the number of firing half-days is determined by counting.

323 Determination of the number of shots

1 For existing firing range installations, the number of shots Mi per weapons category is determined from the operational logs.

2 If the operational logs of existing firing range installations are incomplete or if the firing range installations are new or have been modified, the number of shots M is determined from forecasts of future use.

Annex 8 64

64Inserted by No II of the O of 27 June 1995 (AS 1995 3694). Revised in accordance with No II para. 2 of the O of 12 April 2000 (AS 20001388) and of the O of 23 Aug. 2006, in force since 1 Nov. 2006 (AS 2006 3693).

(Art. 40 para. 1)

Exposure Limit Values for Noise at Military Aerodromes

1 Scope

1 The exposure limit values specified in Number 2 apply to traffic noise from military aerodromes.

2 Civil regional airports and airfields used for military purposes also count as military aerodromes.

3 Helicopters are considered equivalent to propeller aircraft.

4 Noise from repair workshops, maintenance workshops and similar operations at military aerodromes is considered equivalent to the noise from industrial and commercial installations (Annex 6 Number 1).

2 Exposure Limit Values

21 Exposure Limit Values expressed as Lr

Sensitivity level
(Art. 43)

Planning value

Impact threshold

Alarm value

Lr in dB (A)

Lr in dB (A)

Lr in dB (A)

I

50

55

65

II

60

65

70

III

60

65

70

IV

65

70

75

22 Exposure Limit Values expressed as Lrz

In addition to the exposure limit values expressed as Lr, the exposure limit values specified in Annex 5 and expressed as Lr, referred to below as Lrz, also apply to the noise from civilian traffic at military airfields.

3 Determination of the Rating Sound Level

31 Principles

1 The rating sound level Lr for noise from military aerodromes is calculated from the rating sound levels Lrm for military aircraft noise and Lrz for civil aircraft noise, as follows:

Lr = 10 × log (100,1×Lrm+ 100,1×Lrz)

2 The rating sound level Lrz is determined in the same way as the corresponding Lr for civil aerodromes specified in Annex 5 Numbers 3 and 4.

3 The rating sound level Lrm is determined from the partial rating sound levels Lrj, for noise from jet aircraft, and Lrp, for noise from propeller aircraft, as follows:

Lrm = 10 × log (100,1×Lrj+ 100,1×Lrp)

4 The partial rating sound level Lrj is the sum of the equivalent continuous A-weighted sound level Leqj arising from the operation of jet aircraft, and the level corrections K0 and K1:

Lrj = Leqj + K0 + K1

5 The partial rating sound level Lrp is the sum of the equivalent continuous A-weighted sound level Leqp arising from the operation of propeller aircraft, and the level corrections K0 and K2:

Lrp = Leqp + K0 + K2

6 The equivalent continuous sound levels Leqj and Leqp are calculated for the average number of hourly flight movements for a day with an average level of traffic, whereby flight movements of jet aircraft and propeller aircraft are counted separately (number of flight movements nj and np).

7 Flight movements are all takeoffs and landings of jet and propeller aircraft. Go-arounds count as two flight movements.

32 Numbers of Flight Movements nj and np for Military Aerodromes

1 For existing military aerodromes, the number of flight movements nj and np are determined as follows:

a.
the six months of the operating year with the greatest amount of traffic are identified, whereby flight movements of jet aircraft and propeller aircraft are counted separately;
b.
for these six months, the number of flight movements of jet aircraft Mj and propeller aircraft Mp are determined;
c.
the numbers of flight movements nj and np are calculated from Mj and Mp by averaging them over 130 days and twelve daytime hours:
nj = Mj/(12 x 130) np = Mp/(12 x 130)

2 For military aerodromes that are to be built or modified, the numbers of flight movements nj and np are determined from forecasts of traffic volume.

33 Level Corrections

1 The level correction K0 is equal to -8.

2 The level correction K1 is calculated from the annual number of flight movements of jet aircraft Nj as follows:

K1 = 0 for Nj < 15 000

K1 = 10 x log (Nj/15 000) for Nj ≥ 15 000

3 The level correction K2 is calculated from the annual number of flight movements of propeller aircraft Np as follows:

K2 = 0 for Np < 15 000

K2 = 10 x log (Np/15 000) for Np ≥ 15 000

Annex 9 65

65 Inserted by No II para. 2 of the O of 30 June 2010, in force since 1 Aug. 2010 (AS 2010 3223).

(Art. 40 para. 1)

Exposure Limit Values for Noise from Military Firing Ranges and Training Grounds

1 Scope

1 The exposure limit values specified in Number 2 apply to the firing noise on military firing ranges and training grounds.

2 In addition to the exposure limit values specified in Number 2, the exposure limit values specified in Annex 7 apply to the noise from civil firing on military firing ranges and training grounds, with the exception of firing by the police and border guards.

3 Noise from repair workshops, maintenance workshops and similar operations and noise from traffic on military firing ranges and training grounds is considered equivalent to the noise from industrial and commercial installations (Annex 6 Number 1).

4 Noise from helicopters on military firing ranges and training grounds is considered equivalent to the noise from heliports (Annex 5 Numbers 23 and 5).

2 Exposure Limit Values

Sensitivity level
(Art. 43)

Planning value

Impact threshold

Alarm value

Lr in dB(A)

Lr in dB(A)

Lr in dB(A)

I

50

55

65

II

55

60

70

III

60

65

70

IV

65

70

75

3 Determination of the Rating Sound Level

31 Principles

The rating sound level Lrfor the firing noise from military firing ranges and training grounds is calculated as follows from the sound levels LAE1 and LAE2 and the level corrections K1 and K2:

Lr =10 .log(100.1.LAE1+100.1.(LAE2+K1) ) – 10 .log(T) + K2

Where:

Lr Rating sound level for noise from military firing ranges and training grounds;

T Rating time in seconds = 52 weeks · 5 days · 12 hours · 60 minutes · 60 seconds;

LAE1 Sound exposure level of all the shooting events of a year which have taken place Mondays to Fridays between 07 and 19 hours;

LAE2 Sound exposure level of all the shooting events of a year which have taken place outside of the LAE1timeframe;

K1 5

K2 15

32 Determination of Shooting Operations

1 For existing military firing ranges and training grounds, the number of shots is determined from surveys carried out over three years.

2 If, for existing military firing ranges and training grounds, no data on the number of shots is available or if the installations are new or have been modified, the number of shots is determined from forecasts of future use.

Diese Seite ist durch reCAPTCHA geschützt und die Google Datenschutzrichtlinie und Nutzungsbedingungen gelten.

Feedback
Laden